Environmental car bodies
Steel, stainless steel and aluminum
Organic and solid urban waste tippers
Intended for the collection of dead animals and by-products of animal origin such as cattle, pigs, goats, horses, birds, etc. Also intended for the collection of MSW, as well as scrap
HIGH RESISTANCE
Curved section for light vehicles
Collection of birds and small animals.
Made of aluminum and stainless steel.
Canvas roof, aluminum caps, stainless steel caps.
For trucks from 12 to 18 meters
Collection of larger animals.
Made of aluminum and stainless steel
Canvas roof, aluminum caps or stainless steel caps
The crane winch is suitable for hard-to-reach places
Its use is suitable to bring the animal closer to the truck and later use the hydraulic clamp for lifting and unloading.
Tipping semi-trailer
Great load capacity for any type of animals.
Made of aluminum and stainless steel
Canvas roof, aluminum caps or stainless steel caps
The crane winch is suitable for hard-to-reach places
Its use is suitable to bring the animal closer to the truck and later use the hydraulic clamp for lifting and unloading.
Mother platform
Container loading platform
With guides for accommodation for 3 containers with movement by hook equipment
Hook container
Specific containers to leave a deposit on the farms for their subsequent collection and distribution with trucks with a Multiliftif type hook.
Made of aluminum and stainless steel
Tipper with crane
For urban selective collection.
Made of aluminum and stainless steel.
Equipped with hydraulic upper doors with reducer system.
Automatic opening rear hatch.
Cranes with hydraulic equipment at the top for handling underground containers, such as glass igloos.
For the collection of bulky urban items
Cargo box with fixed sides made of aluminum with movable internal front.
Rear lifting platform with a capacity of 2,000 Kg.
Roof with sliding canvas for top loading.
Cleaning equipment for underground containers
High pressure and disinfection equipment for the interior and exterior cleaning of underground containers.
The equipment is installed in the swingarm chassis itself or in an autonomous vehicle, dedicated exclusively to maintenance and cleaning.
For scrap metal collection
Model ZSA / ZDR Mixed Swingarm in Steel and chassis in Aluminum.
Anti-wear steel
HARDOX QUALITY 450 hardness:
- Tensile strength: 140 Kg. / Mm2.
- Hardness: 425-475 Brinell.
- Elastic limit: 120 Kg. / Mm2.
Features
FLOOR / SOLERA: One piece. Made of 4/5 mm hardox sheet metal
SIDES: Fixed with pillars and upper molding. Ribbed steel sheet with 3.2 mm. Wide abutments, no ribs, which gives greater flexibility
REAR: With 2 ribbed leaves with pneumatic opening and junk closing.
LOWER CYLINDER: Direct or Progressive Throw
FINISHES: Shot blasting in steel, primed and painted in selected Ral with oven drying.
ALUMINUM CHASSIS:
- With 3 Axes; Air suspension; Disc brakes and drum option.
- 1 axle lift and option 2.
- WABCO integral electronic system, traction aid.
- Folding rear underrunner with round bar
Customize it however you want
You decide how you want your semi-trailer. Configure it as you wish and adapt it to the specific needs of your work.
Hydraulics
Choose between our hydraulic and automatic systems for both the bathtub and the gate
Doors and gate
There are many possibilities for the type of gate, as well as the opening system
Floor and sides
Whether smooth or angled in breakwater to control fluids both on the ground and on the sides
Awnings and extras
Roller-shaped cover canvas with manual sliding. And a whole set of extras.
Cranes and Multilift
Aluminum or stainless steel lids
Zipper opening system
Tipper hydraulics
Lifting by double hydraulic cylinder
Covers
Aluminum or stainless steel lids
Zipper opening system
Opening and hinge
Hydraulic gate opening system
Zipper flaps opening
Awnings and tarpaulins
Manual and automatic sliding
Accessories
Drawers, battery covers and retractable ladders finish off the accessories to personalize your dump truck
And if this were not enough, tell us what special feature you want in your dump truck and we will manufacture it.
Sure you have many doubts, right?
Call now at 926 647 630 or contact us and our sales representatives will be happy to help you.